Topcon 3D-MC MAX Dual Antenna Mastless Machine Control Kit
This is a Topcon 3D-MC MAX Mast-less Machine Control Kit with a full Install Wiring/Bracket kit to completely setup a Dozer. This 3D-MC MAX kit is Topcon's current Machine Control System and uses two MC2+ IMU Sensors to be able to remove the mast from the blade and attached the antennas to the cab instead. The internal radio is a 915 Spread Spectrum 900 MHz and will work with most Topcon Base and Rover Kits operating at the same frequency. This kit includes everything needed for the Machine Control installation and the GX-55 is Topcon's current display. This entire kit has completed a thorough test by our technicians and includes a 30 Day Return and 90 Day Warranty. Please contact us at 360-571-2346 with any questions!
- 1 -Topcon GX-55 Display w/ Grade Max Automatics Enabled
- - 3DMC Version 12.2 Software
- 1 - Topcon MC-R3 Dual Port Receiver w/ Mounting Bracket
- - Topcon FH915+ Spread Spectrum 900 MHz Internal Radio
- 2 - Topcon Twin PG-S3 Antennas
- 2 - Topcon MC2+ IMU Sensors w/ Coil Cables
- 1 - Topcon Full 3D-MC MAX Dozer Install Kit w/ Brackets
- 1 - Radio Antenna w/ Mag Mount
- 1 - Topcon Transport Case
Some Current Purchased Enabled Options:
- MC2 Sensor
WarrantyThis Includes a 90 Day Non Defect Warranty along with a 30 Day Return Policy. Warranty will cover repair, replacement, or refund at sellers discretion.