Topcon 3D-MC MAX Dual Antenna Mastless UHF II Machine Control Kit, GX-55 Display Topcon 3D-MC MAX Dual Antenna Mastless UHF II Machine Control Kit, GX-55 Display Topcon 3D-MC MAX Dual Antenna Mastless UHF II Machine Control Kit, GX-55 Display Topcon 3D-MC MAX Dual Antenna Mastless UHF II Machine Control Kit, GX-55 Display Topcon 3D-MC MAX Dual Antenna Mastless UHF II Machine Control Kit, GX-55 Display Topcon 3D-MC MAX Dual Antenna Mastless UHF II Machine Control Kit, GX-55 Display Topcon 3D-MC MAX Dual Antenna Mastless UHF II Machine Control Kit, GX-55 Display Topcon 3D-MC MAX Dual Antenna Mastless UHF II Machine Control Kit, GX-55 Display Topcon 3D-MC MAX Dual Antenna Mastless UHF II Machine Control Kit, GX-55 Display Topcon 3D-MC MAX Dual Antenna Mastless UHF II Machine Control Kit, GX-55 Display Topcon 3D-MC MAX Dual Antenna Mastless UHF II Machine Control Kit, GX-55 Display Topcon 3D-MC MAX Dual Antenna Mastless UHF II Machine Control Kit, GX-55 Display Topcon 3D-MC MAX Dual Antenna Mastless UHF II Machine Control Kit, GX-55 Display
Trimble

Topcon 3D-MC MAX Dual Antenna Mastless UHF II GPS Machine Control Kit, GX-55 Display

$41,500.00
Current Stock: 1
Condition: Used

Topcon 3D-MC MAX Dual Antenna Mastless Machine Control Kit

This is a Topcon 3D-MC MAX Mast-less Machine Control Kit with a full Install Wiring/Bracket kit to completely setup a Dozer. This 3D-MC MAX kit is Topcon's current Machine Control System and uses two MC2+ IMU Sensors to be able to remove the mast from the blade and attached the antennas to the cab instead. The internal radio is a Digital UHF II 450-470 MHz and will work with most Topcon Base and Rover Kits operating at the same frequency. This kit includes everything needed for the Machine Control installation and the GX-55 is Topcon's current display. This entire kit has completed a thorough test by our technicians and includes a 30 Day Return and 90 Day Warranty. Please contact us at (360)571-2346 with any questions!

This Includes:

  • 1 -Topcon GX-55 Display
  •  - GradeMax Dozer Automatics Enabled
  • - 3DMC Version 12.2 Software
  • 1 - Topcon MC-R3 Dual Port Receiver w/ Mounting Bracket
  • - Topcon Digital UHF II 450-470 MHz Internal Radio
  • 2 - Topcon PG-S3 Antennas
  • 2 - Topcon MC2+ IMU Sensors w/ Coil Cables
  • 1 - Topcon Full 3D-MC MAX Dozer Install Kit w/ Brackets
  • 1 - Radio Antenna w/ Mag Mount
  • 1 - Topcon Transport Case

Some Current Purchased Enabled Options:

  • GradeMax
  • GPS
  • Glonass
  • Automatics
  • MC2 Sensor
  • Dozer
Full Description
Extended Warranty
Qty
  • Description

    Topcon 3D-MC MAX Dual Antenna Mastless Machine Control Kit

    This is a Topcon 3D-MC MAX Mast-less Machine Control Kit with a full Install Wiring/Bracket kit to completely setup a Dozer. This 3D-MC MAX kit is Topcon's current Machine Control System and uses two MC2+ IMU Sensors to be able to remove the mast from the blade and attached the antennas to the cab instead. The internal radio is a Digital UHF II 450-470 MHz and will work with most Topcon Base and Rover Kits operating at the same frequency. This kit includes everything needed for the Machine Control installation and the GX-55 is Topcon's current display. This entire kit has completed a thorough test by our technicians and includes a 30 Day Return and 90 Day Warranty. Please contact us at (360)571-2346 with any questions!

    This Includes:

    • 1 -Topcon GX-55 Display
    •  - GradeMax Dozer Automatics Enabled
    • - 3DMC Version 12.2 Software
    • 1 - Topcon MC-R3 Dual Port Receiver w/ Mounting Bracket
    • - Topcon Digital UHF II 450-470 MHz Internal Radio
    • 2 - Topcon PG-S3 Antennas
    • 2 - Topcon MC2+ IMU Sensors w/ Coil Cables
    • 1 - Topcon Full 3D-MC MAX Dozer Install Kit w/ Brackets
    • 1 - Radio Antenna w/ Mag Mount
    • 1 - Topcon Transport Case

    Some Current Purchased Enabled Options:

    • GradeMax
    • GPS
    • Glonass
    • Automatics
    • MC2 Sensor
    • Dozer