Topcon 3D-MC2 Dual Machine Control Kit w/ Full Dozer Install Wiring
This is a Topcon 3D-MC2 Machine Control Kit with a full Install Wiring/Bracket kit to completely setup a Dozer. The internal radio is a Digital UHF II 450-470 MHz and will work with most Topcon Base and Rover Kits operating at the same frequency. This kit includes everything needed for the Machine Control installation and a Topcon GX-60 Display. This entire kit has completed a thorough test by our technicians and includes a 30 Day Return and 90 Day Warranty. Please contact us at 360-571-2346 with any questions!
- 1 -Topcon GX-60 Display w/ Automatics Enabled
- 3DMC Version 12.1.327 Software
- 1 - Topcon MC-R3 Dual Port Receiver W/ Mounting Bracket
- Topcon UHF II 410-470 MHz Internal Radio
- 2 - Topcon Twin G3-A1M Antennas W/ Mast Mounts
- 1 - Topcon MC2 Sensor w/ Coil Cable
- 1 - Topcon Full Dozer Install Kit
- 1 - Topcon Mast w/ Dual Antenna Bracket
- 1 - Radio Antenna w/ Mag Mount
- 1 - Topcon Dual Antenna Cable
- 1 - Topcon Transport Case
This is a Full Dozer Hardware and Install Kit, and will work on multiple machines, does not include the hydraulic valve.
Some Current Purchased Enabled Options:
- MC2 Sensor
- Motorgrader - Plus Much More, Please See Pictures!
WarrantyThis Includes a 90 Day Non Defect Warranty along with a 30 Day Return Policy. Warranty will cover repair, replacement, or refund at sellers discretion.