Topcon 3D-MC2 Dual Antenna Kit w/ MC-R3 UHF II Control Box & GX-55 Display Topcon 3D-MC2 Dual Antenna Kit w/ MC-R3 UHF II Control Box & GX-55 Display Topcon 3D-MC2 Dual Antenna Kit w/ MC-R3 UHF II Control Box & GX-55 Display Topcon 3D-MC2 Dual Antenna Kit w/ MC-R3 UHF II Control Box & GX-55 Display Topcon 3D-MC2 Dual Antenna Kit w/ MC-R3 UHF II Control Box & GX-55 Display Topcon 3D-MC2 Dual Antenna Kit w/ MC-R3 UHF II Control Box & GX-55 Display Topcon 3D-MC2 Dual Antenna Kit w/ MC-R3 UHF II Control Box & GX-55 Display Topcon 3D-MC2 Dual Antenna Kit w/ MC-R3 UHF II Control Box & GX-55 Display Topcon 3D-MC2 Dual Antenna Kit w/ MC-R3 UHF II Control Box & GX-55 Display Topcon 3D-MC2 Dual Antenna Kit w/ MC-R3 UHF II Control Box & GX-55 Display Topcon 3D-MC2 Dual Antenna Kit w/ MC-R3 UHF II Control Box & GX-55 Display Topcon 3D-MC2 Dual Antenna Kit w/ MC-R3 UHF II Control Box & GX-55 Display Topcon 3D-MC2 Dual Antenna Kit w/ MC-R3 UHF II Control Box & GX-55 Display Topcon 3D-MC2 Dual Antenna Kit w/ MC-R3 UHF II Control Box & GX-55 Display Topcon 3D-MC2 Dual Antenna Kit w/ MC-R3 UHF II Control Box & GX-55 Display
Topcon

Topcon 3D-MC2 Dual Antenna GPS Kit w/ MC-R3 UHF II Control Box & GX-55 Display

$37,500.00
Current Stock: 1
Condition: Used
Shipping: Free Shipping

Topcon 3D-MC2 Machine Control Kit

This is a Topcon 3D-MC2 Dual Antenna Machine Control Kit with Topcon's current GX-55 Display. The internal radio is a Digital UHF II 450-470 MHz and will work with most Topcon Base and Rover Kits operating at the same frequency. This kit includes everything needed to install Machine Control on a Topcon wired Dozer, Motorgrader, Scraper and more machines. This entire kit has completed a thorough test by our technicians and includes a 30 Day Return and 90 Day Warranty. Please contact us at 360-571-2346 with any questions!

This Includes:

  • 1 -Topcon GX-55 Display w/ Automatics Enabled
  • 3DMC Version 12.1.48 Software 
  • 1 - Topcon MC-R3 Dual Port Receiver W/ Mounting Bracket
  • Topcon UHF II 410-470 MHz Internal Radio
  • 2 - Topcon Twin PG-S3 Antennas w/ Mast Mounts
  • 1 - Topcon MC2 Sensor w/ Coil Cable
  • 1 - Topcon Mast w/ Dual Antenna Bracket
  • 1 - Radio Antenna w/ Mag Mount
  • 1 - Topcon Dual Antenna Cable
  • 1 - Topcon Transport Case

Some Current Purchased Enabled Options:

  • GPS
  • GLONASS
  • Automatics
  • Excavator
  • Dozer 
  • Motorgrader - Plus Much More, Please See Pictures!

Condition: This kit is in great working condition with minor wear on MC-R3 (see pictures).

Full Description
Qty
  • Description

    Topcon 3D-MC2 Machine Control Kit

    This is a Topcon 3D-MC2 Dual Antenna Machine Control Kit with Topcon's current GX-55 Display. The internal radio is a Digital UHF II 450-470 MHz and will work with most Topcon Base and Rover Kits operating at the same frequency. This kit includes everything needed to install Machine Control on a Topcon wired Dozer, Motorgrader, Scraper and more machines. This entire kit has completed a thorough test by our technicians and includes a 30 Day Return and 90 Day Warranty. Please contact us at 360-571-2346 with any questions!

    This Includes:

    • 1 -Topcon GX-55 Display w/ Automatics Enabled
    • 3DMC Version 12.1.48 Software 
    • 1 - Topcon MC-R3 Dual Port Receiver W/ Mounting Bracket
    • Topcon UHF II 410-470 MHz Internal Radio
    • 2 - Topcon Twin PG-S3 Antennas w/ Mast Mounts
    • 1 - Topcon MC2 Sensor w/ Coil Cable
    • 1 - Topcon Mast w/ Dual Antenna Bracket
    • 1 - Radio Antenna w/ Mag Mount
    • 1 - Topcon Dual Antenna Cable
    • 1 - Topcon Transport Case

    Some Current Purchased Enabled Options:

    • GPS
    • GLONASS
    • Automatics
    • Excavator
    • Dozer 
    • Motorgrader - Plus Much More, Please See Pictures!

    Condition: This kit is in great working condition with minor wear on MC-R3 (see pictures).

  • Warranty

    Warranty

    This Includes a 90 Day Non Defect Warranty along with a 30 Day Return Policy. Warranty will cover repair, replacement, or refund at sellers discretion.